I have been working on this thing for a while, but I don't know much about HVAC, but I work with electronics all the time. The furnace gets warm, not quite hot (but since I've been working on it, I don't think I've left it running long enough to get hot), and the fan runs constantly. I know that the attic fan for the Deluxe Blend Air II is bad because the alarm has gone off, but I don't know if this would cause the heat to run constantly. I've tried adjusting the thermostat to OFF, AUTO, HEAT, and COOL, but with no luck. The only way to cut off the furnace is by using the breaker. I'm about to try unplugging the thermostat to see if that makes any difference, but I don't think it would since turning it OFF did not work.
I'm taking a wild guess based on the posts I've read and saying that the problem is probably the relay or possible the sequencer, but this is just a guess. Could someone please help?
I also have a question about the Deluxe Blend Air II. I troubleshooted it and the attic fan is definitely bad, but I think there may be other problems. When checking the voltage coming from the wiring harness that connects the upper and lower control board, all of the voltages, except between the red and black, are half what they should be, and the voltage to the damper motor is half what it should be. Could this be caused by a short in the attic fan, or do I have multiple problems going on with the blend air system?
EB12B - Will not shut off
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 41990 Views
-
Last post by Greg
Sat Jan 06, 2018 9:11 am
-
-
Intertherm FEH-017HAC won't shut off
by Jetherid » Mon Dec 07, 2020 6:22 pm » in Nordyne Service & Repair - 0 Replies
- 175622 Views
-
Last post by Jetherid
Mon Dec 07, 2020 6:22 pm
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116438 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167382 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Nordyne M1B1 furnace issue - thermostat c wire not hooked up correctly. It's running off atteries instead
by Tallestt » Mon Apr 20, 2020 6:27 am » in Nordyne Service & Repair - 1 Replies
- 43344 Views
-
Last post by taurolyon
Tue Jun 23, 2020 4:02 pm
-