EB15B Sequencer again?
Posted: Mon Dec 05, 2011 11:04 pm
I purchased a sequencer from you in February this year, installed March 1. Furnace worked well after the new sequencer. Coleman EB15B, original post here for complete details https://www.mobilehomerepair.com/phpbb/v ... 15b#p44098
I started using the furnace again in October and everything seemed to be working fine. Now lately a few times after turning up the heat, I've noticed there's no air blowing from my vents several minutes later. When I go back to the furnace, I can hear the softer clicks from the sequencer, and the louder click and hum of the element, but then element turns off (loud click, hum stops), more soft clicks from sequencer, element clicks off and on, etc. Eventually the blower does start, but I'm afraid my sequencer is going bad again and want to take care of this before it gets really cold.
So I guess my question is two-fold. First, should I test the sequencer as before and is there anything else I should be testing? Second, if sequencer tests bad, is there a warranty since I just purchased it in February this year? Thanks in advance for any help!
I started using the furnace again in October and everything seemed to be working fine. Now lately a few times after turning up the heat, I've noticed there's no air blowing from my vents several minutes later. When I go back to the furnace, I can hear the softer clicks from the sequencer, and the louder click and hum of the element, but then element turns off (loud click, hum stops), more soft clicks from sequencer, element clicks off and on, etc. Eventually the blower does start, but I'm afraid my sequencer is going bad again and want to take care of this before it gets really cold.
So I guess my question is two-fold. First, should I test the sequencer as before and is there anything else I should be testing? Second, if sequencer tests bad, is there a warranty since I just purchased it in February this year? Thanks in advance for any help!