Coleman EB12B blower speed
Posted: Sun Jan 22, 2012 5:30 am
Hi guy,s
I have a Coleman EB12B electric furnace #wol615630, 39,000 BTU's, No AC and No heat pump
.I just wanted to know how to lower the speed of the blower. The blower is 4 speed and it has red, blue,black and yellow wires..The Red and the black are hooked up, the blue (med-high) is not and the yellow (med-low) isn't either. The red is for heating and black for cooling..what I have read and understood is that you would want a slower speed for heating and higher for cooling. I live in a single wide mobile...heat not even through it and all duct work has been checked and sealed. insulation is fair..but blower does blow really hard, harder than it should. Just wanted to know which wire to switch to slow it down and make it comfortable in here.. Thanks... Jim
I have a Coleman EB12B electric furnace #wol615630, 39,000 BTU's, No AC and No heat pump
.I just wanted to know how to lower the speed of the blower. The blower is 4 speed and it has red, blue,black and yellow wires..The Red and the black are hooked up, the blue (med-high) is not and the yellow (med-low) isn't either. The red is for heating and black for cooling..what I have read and understood is that you would want a slower speed for heating and higher for cooling. I live in a single wide mobile...heat not even through it and all duct work has been checked and sealed. insulation is fair..but blower does blow really hard, harder than it should. Just wanted to know which wire to switch to slow it down and make it comfortable in here.. Thanks... Jim