Page 1 of 1
Replacing door
Posted: Sat Mar 09, 2013 4:16 pm
by Finatic
We live in an older mobile home and I would like to replace the "back door" that opens out with a regular door that opens in- Is this possible? Thanks
Re: Replacing door
Posted: Sat Mar 09, 2013 7:02 pm
by ponch37300
Anything is possible, just depends on how much work it will take. I'm going to assume your door opening isn't "standard" so a standard door from a box store won't fit?
Re: Replacing door
Posted: Sat Mar 09, 2013 7:27 pm
by UmpJJ
Reciprocating saws are wonderful things. And new doors come pre-framed to swing any way you like. Have at it.
UmpJJ
Re: Replacing door
Posted: Sun Mar 10, 2013 8:25 am
by Greg
Hi & welcome. If you have enough room to fit a full size (80") door PLUS the top header you should be fine. You will most likely need to work around some electrical so don't just go in with a saw and start cutting.
If you can't fit an 80" door, you can still replace it, just cut a full size door down. See the articles section of the site.
Greg