Page 1 of 1
Coleman Furnace & A/C Compatibility
Posted: Thu Mar 13, 2008 7:02 pm
by FindaSong
I have a Coleman Presidential Evcon 7970 Standing Pilot Model furnace, and was looking at buying a used A/C unit for it from a classified ad I saw. Are all of the Coleman Furnaces and air conditioners compatable? My thermostat is already ready for A/C. I'm looking at A/C model #BRCS0301BD with A Coil #G1NA030S17KA. Can anyone help me before I decide to get the A/C unit? Thanks very much in advance!
RE: Coleman Furnace & A/C Compatibility
Posted: Fri Mar 14, 2008 1:26 am
by Robert
Hi,
Yes, they are compatible provided the a/c is an a/c designated for mobile home use.
It also has to be correct size and fall within size limits for your furnace.
You then will most likely need a a/c control box or change out some heat only components for heat and a/c components in heating control box.
You may also need to replace blower assembly if it is not an a/c compatible blower assembly.
You will have to get an a-coil cabinet to install a-coil under the furnace.
Thanks,
Robert
Posted: Fri Mar 14, 2008 2:28 pm
by FindaSong
Thanks so much for your help!!! The furnace is already set-up for A/C, just didn't know if certain models needed to be matched up, but you have answered my question right to a 'T'. Thanks again!
RE: Coleman Furnace & A/C Compatibility
Posted: Fri Mar 14, 2008 4:03 pm
by Robert
Hi,
You're very welcome, happy to help.
Thanks,
Robert