Page 1 of 1

AC pan needed,,,

Posted: Sat Jun 07, 2008 1:51 pm
by imnothot02
I own a home with a condinser # MBC30MQ i need a new pan due to the old pan having a hole in it due to rust.

Any ideas on where to get this, also what do you think it may cost to reclaim my refrigerant the lines are in front of the pan so the will brobally need to be lowered down somehow...

RE: A/C pan needed,,,

Posted: Sat Jun 07, 2008 2:47 pm
by Mark
The drain pan that you need for underneath an a-coil in a mobile home is 6324-5101 and can be found on this page: http://www.mobilehomerepair.com/ColemanAC.html.

We always like to tell folks to consider the age and condition of your a-coil. The service call to replace a drain pan is about the same as a service call to replace your a-coil. So for a couple hundred more dollars, you could have an all new a-coil vs $400-$500 later. A-coils are also shown at the bottom of this page: http://www.mobilehomerepair.com/ColemanAC.html.

Mark

RE: AC pan needed,,,

Posted: Sat Jun 07, 2008 3:21 pm
by imnothot02
He mentoned that since tis gas heat that the pan needs to be metal, is this true?

RE: AC pan needed,,,

Posted: Mon Jun 09, 2008 3:50 am
by Robert
Hi,

If you are in a mobile home, heavy duty plastic pans are all that are used now.


Thanks,
Robert