mobilehomerepair.com

I am going to install a new Coleman furnace in a mobile home. It will be a replacement.It is the ColemanDFAH084BBSA, 4,000 series..I need to know exactly what I need for the exhaust pipe coming out of the furnace & goint thru the roof etc

Can someone tell me exactly what I will need? Is there a kit that contains everything or do I have to get the components separately?

When the furnace arrives, I want to be able to connect everything thru the roof without having to order parts & cause a delay..

Thanks Bob

Hi Bob,


You'll need the measurement from top of furnace to the roof. Then

go here and select size needed for either flat or slanted roof:

http://www.mobilehomerepair.com/ColemanChimneys.html


You'll also need the hydroment sealant for flashing and swivel joints.


Thanks,
Robert

RIVERPOSIE wrote:I am going to install a new Coleman furnace in a mobile home. It will be a replacement.It is the ColemanDFAH084BBSA, 4,000 series..I need to know exactly what I need for the exhaust pipe coming out of the furnace & goint thru the roof etc

Can someone tell me exactly what I will need? Is there a kit that contains everything or do I have to get the components separately?

When the furnace arrives, I want to be able to connect everything thru the roof without having to order parts & cause a delay..

Thanks Bob

Thank you again very much, you have been a great help...
Bob

Hi Bob,

Go to the link and follow the instructions given previously.


Take care and best wishes,
Robert