Page 1 of 1
Need AC Control Mod for EB20B
Posted: Sat Aug 07, 2010 1:26 pm
by soyer38301
I have a Coleman EB20B furnace that I need an AC control module for. Can anyone point me in the right direction to find one?
Thank you.
Scott
Re: Need AC Control Mod for EB20B
Posted: Sat Aug 07, 2010 2:48 pm
by Robert
Hi Scott,
Control Module has many branches and those two words used many ways. What is the purpose yours is for and where is it located, so I can ensure we are on the same page please.
Thanks,
Robert
Re: Need AC Control Mod for EB20B
Posted: Sun Aug 08, 2010 10:02 pm
by soyer38301
Robert -- I have the furnace but no Central AC control. I was told that I need a separate module in order to operate my central ac with this unit. The furnace itself states that the blend control is needed to operate the ac so I figured that is what I needed to look for.
Thanks.
Scott in Illinois
Re: Need AC Control Mod for EB20B
Posted: Sun Aug 08, 2010 11:08 pm
by Robert
Hi Scott,
Do you currently have the outside condenser and indoor a-coil for having a/c ?
If so, the t-stat and a fan relay in the control box is all that is needed and both of those you have already.
IF you have a Blend Air system, you'll need a blend air control box IF it is a Deluxe Blend Air II.
Your wiring then is spliced into the blend air circuits.
Thanks,
Robert