Coleman eb23b not enough heat
Posted: Mon Nov 08, 2010 5:10 pm
Hello, I have a Coleman eb23b electric furnace. When using the heat the output is lukewarm 85-90 degrees. When I remove the air filter or access pannel the output is hot around 150 degrees. Once I reinstall the pannel and filter I can hear three clicks which I am assuming are the limit switches. I have cleaned the evaporator core and removed and cleaned the blower and squirrel cage. All of my registers are open all the way. And I have changed the filter from a Merv 7 to a less restrictive merv 2 filter. What do you you think is going on? Is it common for 3 limit switches to go bad at the same time?
Thanks, Kyle
Thanks, Kyle